Wooden Floor-Anti-fouling Coatings
Description
Technical Parameters
Huzhou Jiafu Macromolecular Material Co., Ltd. is one of the most reliable manufacturers and suppliers of wooden floor-anti-fouling coatings in China. Welcome to wholesale bulk high-grade wooden floor-anti-fouling coatings for sale here from our factory. We also accept customized orders.
Core Information
1. Product Introduction
Wooden floor-Anti-fouling Coatings is a specially formulated ultraviolet (UV) curable coating designed for application on wooden floor surfaces. It effectively enhances the stain resistance and durability of wood flooring and is suitable for various types of wood floors, including solid wood, engineered wood, and bamboo flooring.
2. Core Value Proposition
- Solving high-pollution challenges: Effectively tackles difficult-to-clean contaminants such as restaurant grease, laboratory chemical residues, and pet stains. Frequent wiping often leads to coating wear and high cleaning costs-this product eliminates those issues.
- Core features: Organosilicone low–surface-energy formulation achieves ISO 26987 Level 0 stain resistance. All types of stains can be wiped clean within 10 seconds, reducing cleaning costs by 50%.
- Additional assurance: Low-VOC eco-friendly formula + Grade 0 adhesion ensures strong chemical resistance and long-term durability in high-pollution environments.
Core Product Advantages
1. Level 0 antifouling core technology
- Low–surface-energy formulation: Incorporates high-purity organosilicone materials that form a low–surface-energy film after curing (surface energy ≤25 mN/m). Stains cannot adhere, offering a superior mechanism compared to ordinary stain-resistant coatings that rely only on "surface hydrophobicity."
- Full-scenario stain compatibility: Resists not only everyday water marks and dust, but also restaurant grease, laboratory acid/alkali chemicals (pH 2–12), and pet urine-providing a much broader stain-resistance range.
- Enhanced wipe resistance: Even after 5,000 repeated wiping cycles, the coating maintains ISO Level 0 stain resistance, preventing the typical issue of "strong initial performance but rapid degradation over time."
2. Adaptability to high-pollution scenarios
- Dedicated application scenarios: Restaurants, laboratories, pet boarding centers, school cafeterias, and other spaces exposed to "multiple types of stains and frequent wiping."
- Compatible substrates: Solid wood flooring, bamboo flooring, and wear-resistant composite flooring (materials well-suited for high-pollution, heavy-use environments).
- Construction advantages: UV rapid curing allows restaurants to perform construction at night and resume normal operations the next day, ensuring zero disruption to business.
3. Environmental protection and long-term maintenance
- Environmental Performance: Low-VOC formula with solvent-free curing; complies with environmental acceptance standards for commercial spaces and causes no secondary contamination in laboratory settings.
- Maintenance Cost Optimization: Stains can be wiped clean in 10 seconds; cleaning frequency reduced by 50%, saving 30% in cleaning labor costs. The coating has a lifespan of 8–10 years, reducing the need for refurbishments.
- Chemical Corrosion Resistance: Withstands long-term exposure to common acidic and alkaline reagents and oils without discoloration or blistering, suitable for special laboratory requirements.
Construction process
Dedicated construction process
|
Step |
Construction content |
Curing energy / Key parameters |
Differentiation Objectives |
|
1 |
Substrate pretreatment: sanding with 320-grit sandpaper + degreasing and dust removal + stain-resistance pretreatment |
– |
Enhances compatibility between substrate and stain-resistant coating; suitable for high-contamination environments |
|
2 |
Roll-coat water-based UV adhesion primer + infrared drying |
– |
Base adhesion layer to ensure long-term non-peeling performance |
|
3 |
Roll-coat low-odor UV adhesion primer + UV semi-curing |
140–250 mj/cm² |
Strengthens interlayer bonding to prevent coating delamination |
|
4 |
Roll-coat elastic crystal putty (JF-ZM301) + UV semi-curing |
90–120 mj/cm² |
Elastic filling to buffer stain penetration pressure |
|
5 |
Roll-coat UV elastic wear-resistant primer (JF-ZM601) + UV semi-curing |
70–120 mj/cm² |
Dual protection of elasticity and abrasion resistance; tolerates frequent wiping |
|
6 |
Roll-coat elastic crystal undercoat (JF-ZM501) + UV semi-curing |
90–200 mj/cm² |
Improves surface flatness and prepares for the stain-resistant layer |
|
7–9 |
Roll-coat 3 layers of transparent sandable primer (JF-ZM521) + semi-curing each layer |
90–200 mj/cm² per layer |
Three layers of sandable primer to enhance adhesion and wiping durability |
|
10 |
Light sanding with 320-grit sandpaper |
– |
Removes burrs to ensure smooth wiping without residue |
|
11 |
Roll-coat 5-degree anti-scratch & stain-resistant topcoat (JF-ZM805-KW) + final curing |
340–500 mj/cm² |
Level-0 stain resistance finish; surface energy ≤ 25 mN/m |
Construction Precautions
- Environmental requirements: Construction temperature 5–30°C.
- Stain-resistance test: After application, it is recommended to perform an "oil-stain / reagent adhesion test" to ensure the stain-resistance level meets the standard before putting the floor into use.
- Storage guidelines: Unopened products have a shelf life of 12 months (stored in a dry and ventilated place). The stain-resistant topcoat should be used within 30 days after opening to prevent the silicone components from losing effectiveness.
Technical Specifications
|
Test Project |
Test Standards |
Standard value |
Differences from other UV coatings |
|
Stain-resistance Level |
ISO 26987:2008 |
Level 0 |
Thin-coat / skin-feel / ultra-wear-resistant coatings only reach Level 2–3; significantly stronger stain resistance |
|
Surface Energy |
Surface energy testing standard |
≤25 mN/m |
Regular UV coatings ≥35 mN/m; stains adhere more easily |
|
Abrasion-Wipe Resistance |
Abrasion and wipe resistance test |
≥5000 cycles |
Regular UV coatings ≤3000 cycles; suitable for frequent cleaning |
|
Chemical Corrosion Resistance |
Acid–alkali resistance test |
pH 2–12 |
Regular UV coatings only pH 4–10; suitable for laboratory environments |
|
Adhesion |
GB/T 9286-1998 |
Grade 0 |
Combined with 3 layers of sanding primer to withstand high-frequency wiping |
|
Hardness |
GB/T 6739-2006 |
≥2H |
Balanced stain resistance and durability for heavy-pollution environments |
Hot Tags: wooden floor-anti-fouling coatings, China wooden floor-anti-fouling coatings manufacturers, suppliers, factory, Flame Retardant Coating, Reactive Stain, Elastic Coating, uv cured floor coatings, Soft Touch Paint, abrasion resistant coating
Previous
Odor Free PaintNext
Soft Touch PaintSend Inquiry
